Abrazadera de cable Prysmian de Polietileno (PE) Negro, montaje: Tuerca, Ø cable máx. 19.8mm, 43 x 16 x 26mm
Documentos Técnicos
Especificaciones
Brand
PrysmianTipo de Abrazadera/Pinza
Abrazadera de cable
Diámetro Máximo del Mazo de Cables
19.8mm
Método de Fijación
Tuerca
Material
Polietileno (PE)
Color
Black
Largo
43mm
Profundidad
16 mm
Profundidad
26mm
Dimensiones [L x A x P]
43 x 16 x 26mm
País de Origen
United Kingdom
Datos del producto
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 43.187
1 Box of 25 (Sin IVA)
$ 51.393
1 Box of 25 (IVA Inc.)
1
$ 43.187
1 Box of 25 (Sin IVA)
$ 51.393
1 Box of 25 (IVA Inc.)
1
Comprar en grandes cantidades
| Cantidad | Precio Unitario sin IVA |
|---|---|
| 1 - 4 | $ 43.187 |
| 5 - 9 | $ 41.098 |
| 10+ | $ 38.833 |
Documentos Técnicos
Especificaciones
Brand
PrysmianTipo de Abrazadera/Pinza
Abrazadera de cable
Diámetro Máximo del Mazo de Cables
19.8mm
Método de Fijación
Tuerca
Material
Polietileno (PE)
Color
Black
Largo
43mm
Profundidad
16 mm
Profundidad
26mm
Dimensiones [L x A x P]
43 x 16 x 26mm
País de Origen
United Kingdom
Datos del producto
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.