Conector de acoplamiento de cableado D-436-37-COLD TE Connectivity, 18 → 16 AWG, Azul
Documentos Técnicos
Especificaciones
Brand
TE ConnectivitySplice Type
Butt
Tamaño del cable
18 → 16 AWG
Longitud Global
38.7mm
Aislamiento
Insulated
Color
Blue
País de Origen
Mexico
Datos del producto
Empalmes aéreos aplicados en frío de TE Connectivity
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Splices
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 10.360
Cada Uno (En una Bolsa de 100) (Sin IVA)
$ 12.328,40
Cada Uno (En una Bolsa de 100) (IVA Incluido)
100
$ 10.360
Cada Uno (En una Bolsa de 100) (Sin IVA)
$ 12.328,40
Cada Uno (En una Bolsa de 100) (IVA Incluido)
100
Documentos Técnicos
Especificaciones
Brand
TE ConnectivitySplice Type
Butt
Tamaño del cable
18 → 16 AWG
Longitud Global
38.7mm
Aislamiento
Insulated
Color
Blue
País de Origen
Mexico
Datos del producto
Empalmes aéreos aplicados en frío de TE Connectivity
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12