Terminal redondo Aislado de Cobre TE Connectivity DuraSeal, Rojo, 22 AWG, 18 AWG, Ø int. 5 mm

Código de producto RS: 680-6040Marca: TE ConnectivityNúmero de parte de fabricante: 952651-000
brand-logo
Ver todo en Terminales Redondos

Documentos Técnicos

Especificaciones

Tipo de Producto

Ring Terminal

Serie

DuraSeal

Aislamiento

Insulated

Material de la cubierta

Nylon

Diámetro externo del anillo

10mm

Diámetro interno del anillo

5.3mm

Tamaño de cable mínimo AWG

22AWG

Tamaño de cable máximo AWG

18AWG

Longitud Global

33.99mm

Tamaño del Vástago

5 mm

Color

Red

Material de los Contactos

Copper

Contacto chapado

Tin

Espesor

0.79mm

Certificaciones y estándares

No

Máxima Temperatura de Funcionamiento

125°C

Tamaño de cable mínimo mm²

0.5mm²

Temperatura de Funcionamiento Mínima

-55°C

Tamaño de cable máximo mm2

1mm²

País de Origen

Mexico

Datos del producto

Terminales redondos DuraSeal de TE Connectivity

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Rojo: 0,25 - 1,6 mm²
Azul: 1,0 - 2,6 mm²
Amarillo: 2,7 - 6,6 mm²

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Ver todo en Terminales Redondos

Volver a intentar más tarde

$ 54.400

$ 1.088 Each (In a Pack of 50) (Sin IVA)

$ 64.736

$ 1.294,72 Each (In a Pack of 50) (IVA Inc.)

Terminal redondo Aislado de Cobre TE Connectivity DuraSeal, Rojo, 22 AWG, 18 AWG, Ø int. 5 mm
Seleccionar tipo de embalaje

$ 54.400

$ 1.088 Each (In a Pack of 50) (Sin IVA)

$ 64.736

$ 1.294,72 Each (In a Pack of 50) (IVA Inc.)

Terminal redondo Aislado de Cobre TE Connectivity DuraSeal, Rojo, 22 AWG, 18 AWG, Ø int. 5 mm

Volver a intentar más tarde

Seleccionar tipo de embalaje

Documentos Técnicos

Especificaciones

Tipo de Producto

Ring Terminal

Serie

DuraSeal

Aislamiento

Insulated

Material de la cubierta

Nylon

Diámetro externo del anillo

10mm

Diámetro interno del anillo

5.3mm

Tamaño de cable mínimo AWG

22AWG

Tamaño de cable máximo AWG

18AWG

Longitud Global

33.99mm

Tamaño del Vástago

5 mm

Color

Red

Material de los Contactos

Copper

Contacto chapado

Tin

Espesor

0.79mm

Certificaciones y estándares

No

Máxima Temperatura de Funcionamiento

125°C

Tamaño de cable mínimo mm²

0.5mm²

Temperatura de Funcionamiento Mínima

-55°C

Tamaño de cable máximo mm2

1mm²

País de Origen

Mexico

Datos del producto

Terminales redondos DuraSeal de TE Connectivity

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Rojo: 0,25 - 1,6 mm²
Azul: 1,0 - 2,6 mm²
Amarillo: 2,7 - 6,6 mm²

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed