Documentos Técnicos
Especificaciones
Brand
TE ConnectivityTipo
Tab
Serie
Duraseal
Tamaño de cable mínimo mm2
0.5mm²
Género
Male
Tamaño de cable máximo mm2
1mm²
Tamaño de la Lengüeta
6.35 x 0.8mm
Anchura de la Lengüeta
6.35mm
Grosor de la Lengüeta
0.8mm
Aislamiento
Insulated
Tamaño de cable mínimo AWG
22AWG
Tamaño de cable máximo AWG
18AWG
Método de Terminación
Crimp
Color
Red
Material del Contacto
Brass
Revestimiento del Contacto
Estaño
Material de Aislamiento
Nylon
País de Origen
Mexico
Datos del producto
Hoja Duraseal
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 1.157.959
1 Bag of 1000 (Sin IVA)
$ 1.377.971
1 Bag of 1000 (IVA Incluido)
1
$ 1.157.959
1 Bag of 1000 (Sin IVA)
$ 1.377.971
1 Bag of 1000 (IVA Incluido)
1
Documentos Técnicos
Especificaciones
Brand
TE ConnectivityTipo
Tab
Serie
Duraseal
Tamaño de cable mínimo mm2
0.5mm²
Género
Male
Tamaño de cable máximo mm2
1mm²
Tamaño de la Lengüeta
6.35 x 0.8mm
Anchura de la Lengüeta
6.35mm
Grosor de la Lengüeta
0.8mm
Aislamiento
Insulated
Tamaño de cable mínimo AWG
22AWG
Tamaño de cable máximo AWG
18AWG
Método de Terminación
Crimp
Color
Red
Material del Contacto
Brass
Revestimiento del Contacto
Estaño
Material de Aislamiento
Nylon
País de Origen
Mexico
Datos del producto
Hoja Duraseal
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed