Documentos Técnicos
Especificaciones
Brand
SMCTipo de Accesorio
End Cap
Tamaño del Tubo
4mm
Serie de fabricante
KQ2
Material
Latón, PBT, PP, acero inoxidable
País de Origen
Japan
Datos del producto
Tapón de tubería KQ2C
The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
El diseño de perfil especial de la junta proporciona un sellado positivo bajo presión sin flujo reducido
El botón de liberación permite retirar el tubo fácilmente sin que se produzcan daños
Presión de funcionamiento máxima 10 bar
Presión de funcionamiento máxima del vacío -100 kPa
Presión de prueba 3 MPA
Temperatura ambiente y líquido -5 a +60 °C (agua 0 - 40 °C)
Tube-to-Tube Fittings & Plugs
Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 2.148
Each (In a Pack of 5) (Sin IVA)
$ 2.556,12
Each (In a Pack of 5) (IVA Incluido)
5
$ 2.148
Each (In a Pack of 5) (Sin IVA)
$ 2.556,12
Each (In a Pack of 5) (IVA Incluido)
5
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA | Por Pack |
---|---|---|
5 - 20 | $ 2.148 | $ 10.740 |
25 - 45 | $ 1.999 | $ 9.995 |
50 - 120 | $ 1.937 | $ 9.685 |
125+ | $ 1.893 | $ 9.465 |
Documentos Técnicos
Especificaciones
Brand
SMCTipo de Accesorio
End Cap
Tamaño del Tubo
4mm
Serie de fabricante
KQ2
Material
Latón, PBT, PP, acero inoxidable
País de Origen
Japan
Datos del producto
Tapón de tubería KQ2C
The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
El diseño de perfil especial de la junta proporciona un sellado positivo bajo presión sin flujo reducido
El botón de liberación permite retirar el tubo fácilmente sin que se produzcan daños
Presión de funcionamiento máxima 10 bar
Presión de funcionamiento máxima del vacío -100 kPa
Presión de prueba 3 MPA
Temperatura ambiente y líquido -5 a +60 °C (agua 0 - 40 °C)
Tube-to-Tube Fittings & Plugs
Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.