Documentos Técnicos
Especificaciones
Brand
SiraiVoltaje de suministro
24 V CC
Número de Puertos
3
Tamaño de la Conexión
M5
Conexión
Hembra métrica M5
Funcionamiento
Direct
Posición de la Válvula por Defecto
NC
Suitable Applications
Gas, líquido
Tipo
3/2
Orifice Diameter
1.2mm
Serie
V365
Material del Cuerpo
Brass
Presión máxima de trabajo
8 bar
Rango de temperaturas de funcionamiento
-10 → +60 °C
Máxima Temperatura de Funcionamiento
+60°C
Género de la Conexión
Female
Temperatura de Funcionamiento Mínima
-10°C
Rosca Estándar o Tipo de Conexión
Metric
Tiempo Máximo de Apertura
10ms
Tiempo Máximo de Cierre
10ms
Factor de Flujo Kv
0.04m³/h
País de Origen
France
Datos del producto
V365 series 3/2 micro solenoid valve
Microválvula solenoide de actuación directa 2 / 2 N/C, conexiones M5.
Tamaño compacto, tiempo de respuesta alto y un número alto de ciclos.
Adecuadas para líquidos y gases.
No para usar con líquidos peligrosos de Grupo 1.
Juntas de montaje suministradas con la válvula.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 104.286
Each (Sin IVA)
$ 124.100
Each (IVA Incluido)
1
$ 104.286
Each (Sin IVA)
$ 124.100
Each (IVA Incluido)
1
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA |
---|---|
1 - 4 | $ 104.286 |
5+ | $ 101.160 |
Documentos Técnicos
Especificaciones
Brand
SiraiVoltaje de suministro
24 V CC
Número de Puertos
3
Tamaño de la Conexión
M5
Conexión
Hembra métrica M5
Funcionamiento
Direct
Posición de la Válvula por Defecto
NC
Suitable Applications
Gas, líquido
Tipo
3/2
Orifice Diameter
1.2mm
Serie
V365
Material del Cuerpo
Brass
Presión máxima de trabajo
8 bar
Rango de temperaturas de funcionamiento
-10 → +60 °C
Máxima Temperatura de Funcionamiento
+60°C
Género de la Conexión
Female
Temperatura de Funcionamiento Mínima
-10°C
Rosca Estándar o Tipo de Conexión
Metric
Tiempo Máximo de Apertura
10ms
Tiempo Máximo de Cierre
10ms
Factor de Flujo Kv
0.04m³/h
País de Origen
France
Datos del producto
V365 series 3/2 micro solenoid valve
Microválvula solenoide de actuación directa 2 / 2 N/C, conexiones M5.
Tamaño compacto, tiempo de respuesta alto y un número alto de ciclos.
Adecuadas para líquidos y gases.
No para usar con líquidos peligrosos de Grupo 1.
Juntas de montaje suministradas con la válvula.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.