Transformador de iluminación RS PRO, 230 to 240 V, 12 V, Terminal roscado, Transformador electrónico atenuable, Roscado
Documentos Técnicos
Especificaciones
Brand
RS ProTipo de Producto
Transformador de iluminación
Tensión primaria
230 to 240 V
Tensión secundaria
12 V
Carga mínima requerida
30W
Temperatura Máxima de Operación
70°C
Temperatura Mínima de Operación
40°C
Tipo Sub
Transformador electrónico atenuable
Tipo de terminación
Screw
Tipo de Montaje
Terminal roscado
Profundidad
49 mm
Profundidad
39mm
Longitud:
190mm
Peso
205g
Certificaciones y estándares
EN 61347-2-2, VDE 0710-T14, EN 61347-1, EN 61547, EN 55015, EN 60598-1, EN 61000-3-2
Series
WOLF 150 - WX 150
Método de regulación
Trailing Edge
Frecuencia Máxima de Funcionamiento
60Hz
Frecuencia de funcionamiento mínima
50Hz
País de Origen
Italy
Datos del producto
Low Voltage Lighting Transformers
Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.
Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.
Volver a intentar más tarde
$ 35.406
$ 35.406 Each (Sin IVA)
$ 42.133
$ 42.133 Each (IVA Inc.)
1
$ 35.406
$ 35.406 Each (Sin IVA)
$ 42.133
$ 42.133 Each (IVA Inc.)
Volver a intentar más tarde
1
Documentos Técnicos
Especificaciones
Brand
RS ProTipo de Producto
Transformador de iluminación
Tensión primaria
230 to 240 V
Tensión secundaria
12 V
Carga mínima requerida
30W
Temperatura Máxima de Operación
70°C
Temperatura Mínima de Operación
40°C
Tipo Sub
Transformador electrónico atenuable
Tipo de terminación
Screw
Tipo de Montaje
Terminal roscado
Profundidad
49 mm
Profundidad
39mm
Longitud:
190mm
Peso
205g
Certificaciones y estándares
EN 61347-2-2, VDE 0710-T14, EN 61347-1, EN 61547, EN 55015, EN 60598-1, EN 61000-3-2
Series
WOLF 150 - WX 150
Método de regulación
Trailing Edge
Frecuencia Máxima de Funcionamiento
60Hz
Frecuencia de funcionamiento mínima
50Hz
País de Origen
Italy
Datos del producto
Low Voltage Lighting Transformers
Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.
Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.