Interruptor neumático Panel Acción momentánea RS PRO 250 mm serie 687

Elementos de interruptor bipolares de operación neumática de acción momentánea o de enclavamiento con dos microinterruptores SPDT que actúan simultáneamenteLos contactos disponen de valores nominales de 15 A 250 Va.c./30 Vd.c. y la conexión se realiza a través de terminales Faston (6,35 mm)
La fijación de panel pasante se realiza a través de tuerca UNF de 9/16 (suministrada). El montaje superficial se puede realizar a través de orificios de fijación adicionales de 3,2 mm de diámetro, adecuados para tornillos M3 o tornillos autorroscantes nº 6
Rango de temperaturas de funcionamiento -10 °C a +60 °C (según las limitaciones de longitud del tubo; consulte las tablas de datos adicionales)

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.