Racor neumático RS PRO 6.419, Adaptador de rosca a tubo de banjo, con. A Macho G 1/8, con. B Encaje a presión, 3 mm

Código de producto RS: 317-752Marca: RS PRO
brand-logo
Ver todo de Racores Neumáticos

Documentos Técnicos

Especificaciones

Brand

RS Pro

Conector A

G 1/8 Male

Conector B

Push In 3 mm

Tipo de conexión neumática

Adaptador de rosca a tubo de banjo

Tipo de conexión

Tubo roscado

Conexión Roscada

1/8 plg. macho BSP

Serie de fabricante

6419

Material de Cuerpo

Nylon

Mínima Temperatura de Funcionamiento

-10°C

Máxima Temperatura de Funcionamiento

+60°C

País de Origen

United Kingdom

Datos del producto

Bulkhead Connector

Se pueden implementar varios sistemas de interruptor o actuador con ayuda de estos conectores pasantes en línea
Rango de temperaturas de funcionamiento -10 °C a +60 °C (según las limitaciones de longitud del tubo; consulte las tablas de datos adicionales)

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Volver a intentar más tarde

Vuelva a verificar más tarde.

Volver a intentar más tarde

$ 27.365

Each (Sin IVA)

$ 32.564

Each (IVA Incluido)

Racor neumático RS PRO 6.419, Adaptador de rosca a tubo de banjo, con. A Macho G 1/8, con. B Encaje a presión, 3 mm

$ 27.365

Each (Sin IVA)

$ 32.564

Each (IVA Incluido)

Racor neumático RS PRO 6.419, Adaptador de rosca a tubo de banjo, con. A Macho G 1/8, con. B Encaje a presión, 3 mm
Volver a intentar más tarde

Comprar en grandes cantidades

CantidadPrecio Unitario sin IVA
1 - 4$ 27.365
5 - 9$ 26.517
10+$ 25.115

Documentos Técnicos

Especificaciones

Brand

RS Pro

Conector A

G 1/8 Male

Conector B

Push In 3 mm

Tipo de conexión neumática

Adaptador de rosca a tubo de banjo

Tipo de conexión

Tubo roscado

Conexión Roscada

1/8 plg. macho BSP

Serie de fabricante

6419

Material de Cuerpo

Nylon

Mínima Temperatura de Funcionamiento

-10°C

Máxima Temperatura de Funcionamiento

+60°C

País de Origen

United Kingdom

Datos del producto

Bulkhead Connector

Se pueden implementar varios sistemas de interruptor o actuador con ayuda de estos conectores pasantes en línea
Rango de temperaturas de funcionamiento -10 °C a +60 °C (según las limitaciones de longitud del tubo; consulte las tablas de datos adicionales)

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.