Protector contra transitorios Phoenix Contact, Protección para Conector, 275 V ac, 0.5kA, Montaje en carril DIN,

Código de producto RS: 802-8144Marca: Phoenix ContactNúmero de parte de fabricante: 2839198
brand-logo

Documentos Técnicos

Especificaciones

Tipo de Supresor

Protección para Conector

Máxima Tensión Nominal

275 Vac

Tipo de montaje

Montaje en carril DIN, montaje roscado, orificio pasante

Máxima Corriente de Punta

0.5kA

Serie

PT 2X1VA-230AC-ST

Longitud

17.7mm

Profundidad

52mm

Altura

45mm

Dimensiones

17.7 x 52 x 45mm

Mínima Temperatura de Funcionamiento

-40°C

Temperatura máxima de funcionamiento

+85°C

País de Origen

Germany

Datos del producto

Conectores macho de protección contra sobretensión PLUGTRAB PT- IQ

Conectores macho de protección contra sobretensión sistemáticos e inteligentes PLUGTRAB PT- IQ para el sistema de protección contra sobretensión PLUGTRAB PT- IQ. Los sistemas de protección PLUGTRAB PT- IQ disponen de un display de tres fases único que indica conectores macho dañados o averiados. Las tres fases del display son: verde: bien; amarillo: límite de rendimiento alcanzado y sustitución recomendada; rojo: sobrecargado y sustitución necesaria. Los conectores macho PLUGTRAB PT-IQ de sustitución están diseñados para opciones de conexión de tierra directa e indirecta.

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Volver a intentar más tarde

Vuelva a verificar más tarde.

Volver a intentar más tarde

$ 205.110

Each (Sin IVA)

$ 244.081

Each (IVA Incluido)

Protector contra transitorios Phoenix Contact, Protección para Conector, 275 V ac, 0.5kA, Montaje en carril DIN,

$ 205.110

Each (Sin IVA)

$ 244.081

Each (IVA Incluido)

Protector contra transitorios Phoenix Contact, Protección para Conector, 275 V ac, 0.5kA, Montaje en carril DIN,
Volver a intentar más tarde

Comprar en grandes cantidades

CantidadPrecio Unitario sin IVA
1 - 9$ 205.110
10 - 24$ 188.703
25 - 49$ 182.756
50 - 99$ 173.523
100+$ 164.903

Documentos Técnicos

Especificaciones

Tipo de Supresor

Protección para Conector

Máxima Tensión Nominal

275 Vac

Tipo de montaje

Montaje en carril DIN, montaje roscado, orificio pasante

Máxima Corriente de Punta

0.5kA

Serie

PT 2X1VA-230AC-ST

Longitud

17.7mm

Profundidad

52mm

Altura

45mm

Dimensiones

17.7 x 52 x 45mm

Mínima Temperatura de Funcionamiento

-40°C

Temperatura máxima de funcionamiento

+85°C

País de Origen

Germany

Datos del producto

Conectores macho de protección contra sobretensión PLUGTRAB PT- IQ

Conectores macho de protección contra sobretensión sistemáticos e inteligentes PLUGTRAB PT- IQ para el sistema de protección contra sobretensión PLUGTRAB PT- IQ. Los sistemas de protección PLUGTRAB PT- IQ disponen de un display de tres fases único que indica conectores macho dañados o averiados. Las tres fases del display son: verde: bien; amarillo: límite de rendimiento alcanzado y sustitución recomendada; rojo: sobrecargado y sustitución necesaria. Los conectores macho PLUGTRAB PT-IQ de sustitución están diseñados para opciones de conexión de tierra directa e indirecta.

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.