Documentos Técnicos
Especificaciones
Brand
Phoenix ContactTipo de Supresor
Módulo de protección frente a transitorios
Máxima Tensión Nominal
240 V ac
Tipo de montaje
DIN Rail
Serie
CT-TERMIBLOCK 10 DA
Largo
43mm
Profundidad
118mm
Altura
41mm
Dimensiones del Cuerpo
43 x 118 x 40.9mm
Mínima Temperatura de Funcionamiento
-40°C
Máxima Temperatura de Funcionamiento
+85°C
País de Origen
Germany
Datos del producto
Protector contra transitorios CT de Phoenix Contact
Protector contra transitorios CT de Phoenix Contact diseñado para utilizar con conectores de protección COMTRAB. El protector contra sobretensiones se puede montar en carril DIN y dispone también de bloques terminales de conexión a tierra en ambos lados.
Índice de protección IP20
Negro
Acabado roscado
Rosca de tornillo M3
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Volver a intentar más tarde
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
Phoenix ContactTipo de Supresor
Módulo de protección frente a transitorios
Máxima Tensión Nominal
240 V ac
Tipo de montaje
DIN Rail
Serie
CT-TERMIBLOCK 10 DA
Largo
43mm
Profundidad
118mm
Altura
41mm
Dimensiones del Cuerpo
43 x 118 x 40.9mm
Mínima Temperatura de Funcionamiento
-40°C
Máxima Temperatura de Funcionamiento
+85°C
País de Origen
Germany
Datos del producto
Protector contra transitorios CT de Phoenix Contact
Protector contra transitorios CT de Phoenix Contact diseñado para utilizar con conectores de protección COMTRAB. El protector contra sobretensiones se puede montar en carril DIN y dispone también de bloques terminales de conexión a tierra en ambos lados.
Índice de protección IP20
Negro
Acabado roscado
Rosca de tornillo M3
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.