Fuente de alimentación de montaje en carril DIN Omron, S8VM, 1 salida 12V dc 27A 300W

Part Number S8VM- 30012C

The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM- 30012C has a power rating of 300 W and an output voltage of 12 V dc plus a rated input voltage of 100 V ac to 240 V ac. This Standard model incudes green output indicators plus has a fan providing forced air cooling.
Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-03015C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see example stock number 818-6815.

Features and Benefits.

• Covered type power supply
• Screw terminal
• Design stops screws from falling out of the terminal block
• Switch mode
• Bottom mount
• Green output indicators
• Forced air cooled – built in fan
• Power rating 300 W
• Output voltage 12 V dc
• Input voltage 100 V ac to 240 V ac
• Rated output current 27 A
• Harmonic current emissions
• Efficiency 78% min.
• Frequency 50/60 Hz
• Power failure alarm output – open collector 30 V dc, 50 mA.
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

• A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

• Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

• Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge.
• Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
• Shock resistance 150 m/s **2 in each 6 directions 3 times.

Estándares

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No. 213, EN50178, EN60950-1. Harmonic current emissions conform to EN61000-3-2.