Unidad supresora de transitorios MTL, 1 Polo, 270 Vac, 45kA, Carril DIN
Documentos Técnicos
Especificaciones
Brand
MTLTipo de Supresor
1 Pole Arrester
Máxima Tensión Nominal
270 Vac
Tipo de montaje
DIN Rail
Máxima Corriente de Punta
45kA
Serie
MA3100
Largo
89mm
Profundidad
65mm
Altura
92mm
Dimensiones
89 x 65 x 92mm
Mínima Temperatura de Funcionamiento
-40°C
Temperatura de Funcionamiento Máxima
+80°C
País de Origen
United Kingdom
Datos del producto
Single & 3-phase Mains MA3100 Series
Protección contra transitorios diseñada para soportar formas de onda de corriente de alta magnitud 10/350 μs, como se describe en IEC 61312.
Protección contra transitorios IEC Clase II
Contactos remotos disponibles
Approvals
UL 1449
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Volver a intentar más tarde
Vuelva a verificar más tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificaciones
Brand
MTLTipo de Supresor
1 Pole Arrester
Máxima Tensión Nominal
270 Vac
Tipo de montaje
DIN Rail
Máxima Corriente de Punta
45kA
Serie
MA3100
Largo
89mm
Profundidad
65mm
Altura
92mm
Dimensiones
89 x 65 x 92mm
Mínima Temperatura de Funcionamiento
-40°C
Temperatura de Funcionamiento Máxima
+80°C
País de Origen
United Kingdom
Datos del producto
Single & 3-phase Mains MA3100 Series
Protección contra transitorios diseñada para soportar formas de onda de corriente de alta magnitud 10/350 μs, como se describe en IEC 61312.
Protección contra transitorios IEC Clase II
Contactos remotos disponibles
Approvals
UL 1449
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.