Documentos Técnicos
Especificaciones
Datos del producto
MTN/1010, uso general
Utilizado para registradores de datos, industria pesada, maquinaria de papel
100 mV/g +/-10% Nominal a 80 Hz
Frecuencia de 2 Hz hasta 10 khz
Rango de aceleración dinámica +/-80 G
Tensión aislada nominal 12 Vdc
Conexión de TNC
Carcasa de acero inoxidable conforme a IP65
Par de montaje: 8Nm
Para utilizar con el tornillo prisionero M8 o adhesivo
Dimensiones: 22 (Prof.) x 48 (Long.) mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 15.896
Each (Sin IVA)
$ 18.916
Each (IVA Incluido)
1
$ 15.896
Each (Sin IVA)
$ 18.916
Each (IVA Incluido)
1
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA |
---|---|
1 - 9 | $ 15.896 |
10 - 19 | $ 14.961 |
20+ | $ 14.332 |
Documentos Técnicos
Especificaciones
Datos del producto
MTN/1010, uso general
Utilizado para registradores de datos, industria pesada, maquinaria de papel
100 mV/g +/-10% Nominal a 80 Hz
Frecuencia de 2 Hz hasta 10 khz
Rango de aceleración dinámica +/-80 G
Tensión aislada nominal 12 Vdc
Conexión de TNC
Carcasa de acero inoxidable conforme a IP65
Par de montaje: 8Nm
Para utilizar con el tornillo prisionero M8 o adhesivo
Dimensiones: 22 (Prof.) x 48 (Long.) mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.