Accesorio para conector D-Sub - En blanco, para uso con Subconjunto de conector macho DMS-59, subconjunto de conector
Documentos Técnicos
Datos del producto
Molex LFH Terminal Sticks, 70984 Series
These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .
El código RS 720-6220 tiene portador.
El código RS 720-6227 es sin portador, cortadas a 3,3 mm.
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.
Volver a intentar más tarde
Vuelva a verificar más tarde.
P.O.A.
5
P.O.A.
5
Documentos Técnicos
Datos del producto
Molex LFH Terminal Sticks, 70984 Series
These Molex Low Force Helix (LFH) Matrix 50 Terminal Sticks are sold separately and 4 are required per assembly. Use with 70929 Series Subassembly stock number 720-6612 .
El código RS 720-6220 tiene portador.
El código RS 720-6227 es sin portador, cortadas a 3,3 mm.
Molex Low Force Helix (LFH) Range
The Molex Low Force Helix (LFH) contact system is designed for high-pin count, high speed signal requirements for both cable-to-board and board-to-board applications. The low insertion forces make the LFH system an ideal solution where multiple single lines need to be terminated or packaged into a limited space. The LFH Matrix 50 system contact layout is four rows on 1.27 by 1.27mm (.050 by .050") spacing and features I/O shielding and support both vertical and right angle board mounting. Termination is achieved by the wires being welded or soldered directly to the Terminals Sticks.