Documentos Técnicos
Especificaciones
Datos del producto
Portafusibles y abrazaderas Littelfuse - 6,35 x 32 mm
Los portafusibles y las abrazaderas de Littelfuse ofrecen una solución completa para una gran variedad de requisitos de aplicación. Los portafusibles Littlefuse ofrecen protección para circuitos eléctricos cuando se utilizan con un fusible de 6,35 x 32 mm.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 3.118
Each (In a Pack of 5) (Sin IVA)
$ 3.710,42
Each (In a Pack of 5) (IVA Incluido)
5
$ 3.118
Each (In a Pack of 5) (Sin IVA)
$ 3.710,42
Each (In a Pack of 5) (IVA Incluido)
5
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA | Por Pack |
---|---|---|
5 - 20 | $ 3.118 | $ 15.590 |
25 - 45 | $ 2.966 | $ 14.830 |
50 - 245 | $ 2.791 | $ 13.955 |
250 - 495 | $ 2.641 | $ 13.205 |
500+ | $ 2.487 | $ 12.435 |
Documentos Técnicos
Especificaciones
Datos del producto
Portafusibles y abrazaderas Littelfuse - 6,35 x 32 mm
Los portafusibles y las abrazaderas de Littelfuse ofrecen una solución completa para una gran variedad de requisitos de aplicación. Los portafusibles Littlefuse ofrecen protección para circuitos eléctricos cuando se utilizan con un fusible de 6,35 x 32 mm.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.