Carcasa de conector D Sub SérieTSTRECT, Recto, 36 contactos ABS
Documentos Técnicos
Especificaciones
Brand
ITT CannonNúmero de Contactos
36
Material de la Carcasa
ABS
Orientación del Cuerpo
Recto
Series
TSTRECT
País de Origen
Hungary
Datos del producto
Carcasas para conectores aéreos tipo A
Encajan a presión en cada lado del conector, mejorando la apariencia y proporcionando sujección al cable. Los extremos pueden fijarse con una brida, un lazo, etc.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 5.169
Each (In a Pack of 5) (Sin IVA)
$ 6.151,11
Each (In a Pack of 5) (IVA Inc.)
5
$ 5.169
Each (In a Pack of 5) (Sin IVA)
$ 6.151,11
Each (In a Pack of 5) (IVA Inc.)
5
Documentos Técnicos
Especificaciones
Brand
ITT CannonNúmero de Contactos
36
Material de la Carcasa
ABS
Orientación del Cuerpo
Recto
Series
TSTRECT
País de Origen
Hungary
Datos del producto
Carcasas para conectores aéreos tipo A
Encajan a presión en cada lado del conector, mejorando la apariencia y proporcionando sujección al cable. Los extremos pueden fijarse con una brida, un lazo, etc.
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)