Conector multivía ITT Cannon de 24 vías, 4 filas, paso 5.08mm, para soldar, Montaje en orificio pasante
![brand-logo](https://media.rs-online.com/brand/M2025-01.jpg)
Documentos Técnicos
Especificaciones
Brand
ITT CannonPaso
5.08mm
Número de Contactos
24
Número de Filas
4
Orientación del Cuerpo
Straight
Tipo de montaje
Through Hole
Método de Terminación
Soldador
Chapado de los contactos
Tin
Valor Nominal de Corriente
13.0A
Índice de Tensión
250.0 V
Género
Female
Datos del producto
PCB Mount (Socket)
Completos con contactos hembra torneados, estos conectores se montarán directamente en un PCB. Los contactos están separados en pasos de 0,2". Se bloquearán con carcasas aéreas tipo A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 21.301
Each (Sin IVA)
$ 25.348
Each (IVA Incluido)
1
$ 21.301
Each (Sin IVA)
$ 25.348
Each (IVA Incluido)
1
Documentos Técnicos
Especificaciones
Brand
ITT CannonPaso
5.08mm
Número de Contactos
24
Número de Filas
4
Orientación del Cuerpo
Straight
Tipo de montaje
Through Hole
Método de Terminación
Soldador
Chapado de los contactos
Tin
Valor Nominal de Corriente
13.0A
Índice de Tensión
250.0 V
Género
Female
Datos del producto
PCB Mount (Socket)
Completos con contactos hembra torneados, estos conectores se montarán directamente en un PCB. Los contactos están separados en pasos de 0,2". Se bloquearán con carcasas aéreas tipo A
QM Range Plastic Rectangular
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an in-line connection is required. Both will accept pin or socket inserts, which fit easily into the shells without the use of special tools. The inserts may be soldered or crimped and are available in three wire entry sizes.,Use hole cutter stock no. 543-709 for 24 way. Contacts must be ordered separately - see Range 'Contacts and Tooling.' (for example Crimp Single Piece Contact 466-804 Solder Cup Contact 329-8660 Crimp Tool 531-403)