NEPTUNE SOCKET DUST CAP,SHELL SIZE 24

Código de producto RS: 190-3424Marca: ITT CannonNúmero de parte de fabricante: TNA24DCR0-02B / 192900-0383
brand-logo

Documentos Técnicos

Especificaciones

Datos del producto

Tapas anti-polvo

Tapas antipolvo de plástico para carcasas de conector macho y conector hembra de montaje en panel. Solo es necesario conocer el tamaño de la carcasa para determinar la tapa correcta. Las tapas incluyen una correa de sujeción de plástico.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Volver a intentar más tarde

Vuelva a verificar más tarde.

Volver a intentar más tarde

$ 10.104

Cada Uno (En una Bolsa de 100) (Sin IVA)

$ 12.023,76

Cada Uno (En una Bolsa de 100) (IVA Incluido)

NEPTUNE SOCKET DUST CAP,SHELL SIZE 24

$ 10.104

Cada Uno (En una Bolsa de 100) (Sin IVA)

$ 12.023,76

Cada Uno (En una Bolsa de 100) (IVA Incluido)

NEPTUNE SOCKET DUST CAP,SHELL SIZE 24
Volver a intentar más tarde

Documentos Técnicos

Especificaciones

Datos del producto

Tapas anti-polvo

Tapas antipolvo de plástico para carcasas de conector macho y conector hembra de montaje en panel. Solo es necesario conocer el tamaño de la carcasa para determinar la tapa correcta. Las tapas incluyen una correa de sujeción de plástico.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.