Documentos Técnicos
Especificaciones
Datos del producto
Válvulas de solenoide para placas de conectores en C, tipo 2
Válvulas de solenoide cerradas cuando no se utilizan
Varias opciones de montaje para reducir las conexiones roscadas
El conector macho DIN de tres polos con índice de protección IP65 se puede girar 360° en incrementos de 90°
Coil encapsulado en epoxi
Rango de temperatura del líquido: -10 °C a +90 °C.
Se puede montar en cualquier posición; se prefiere su posición con la coil en Top
Adecuado para:
Aceites y grasas sin aditivos
Agua y líquidos neutros
Aire y gases neutros
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 60.252
Each (Sin IVA)
$ 71.700
Each (IVA Inc.)
1
$ 60.252
Each (Sin IVA)
$ 71.700
Each (IVA Inc.)
1
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA |
---|---|
1 - 4 | $ 60.252 |
5+ | $ 58.411 |
Documentos Técnicos
Especificaciones
Datos del producto
Válvulas de solenoide para placas de conectores en C, tipo 2
Válvulas de solenoide cerradas cuando no se utilizan
Varias opciones de montaje para reducir las conexiones roscadas
El conector macho DIN de tres polos con índice de protección IP65 se puede girar 360° en incrementos de 90°
Coil encapsulado en epoxi
Rango de temperatura del líquido: -10 °C a +90 °C.
Se puede montar en cualquier posición; se prefiere su posición con la coil en Top
Adecuado para:
Aceites y grasas sin aditivos
Agua y líquidos neutros
Aire y gases neutros
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.