Válvula de solenoide Burkert 6012 de 3 puertos, Hembra métrica M5, Directo, NC de 230 Vac

Válvulas de solenoide en miniatura, normalmente cerradas, 3 // 2 vías, serie 6012 - Conexión de puerto roscado

Bobina de cambio sencillo con la válvula colocada
La bobina puede bloquearse en cuatro posiciones de 90º o moverse libremente entre ellas, según sea necesario
Cuerpo de latón, bobina de poliamida y material de sellado de alta calidad FKM
Adecuada para aire comprimido, agua y aceite hidráulico
Temperatura de funcionamiento: –10 a +100 °C máx.
Consumo de potencia: 4 Wdc, 9 VA (entrada); 6 VA (retención)
Protección según IP65 con conector macho de montaje en cable DIN43650C

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.