Válvula de solenoide EMERSON – ASCO 356 de 3 puertos, Hembra G de 1/8 pulg., Directo, NC de 24 V dc
Documentos Técnicos
Especificaciones
Brand
EMERSON – ASCOVoltaje de suministro
24 V dc
Número de Puertos
3
Tamaño de Conexión
1/8in
Conexión
1/8 in G Female
Funcionamiento
Direct
Posición de la Válvula por Defecto
NC
Suitable Applications
Aire, gas inerte, aceite, agua
Tipo
3/2
Orifice Diameter
1.6mm
Serie
356
Material del Cuerpo
Brass
Presión máxima de trabajo
10 bares
Rango de Temperaturas de Funcionamiento
-10 → +100 °C
Mínima Temperatura de Funcionamiento
-10°C
Rosca Estándar o Tipo de Conexión
G
Temperatura máxima de funcionamiento
+100°C
Género de la Conexión
Female
Tiempo Máximo de Cierre
10ms
Factor de Flujo Kv
0.08m³/h
Tiempo Máximo de Apertura
10ms
Datos del producto
Válvulas solenoide 3//2 de control directo, serie 356
Válvulas solenoide 3 / 2 NC de control directo
Compactas y ligeras para facilitar la instalación.
Ninguna presión de control mínima.
Control manual estándar.
Cuerpo de latón.
Conectores enchufables.
Montados a través de 2 orificios perforados en la sección inferior.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Volver a intentar más tarde
Vuelva a verificar más tarde.
$ 99.845
Each (Sin IVA)
$ 118.816
Each (IVA Incluido)
1
$ 99.845
Each (Sin IVA)
$ 118.816
Each (IVA Incluido)
1
Comprar en grandes cantidades
Cantidad | Precio Unitario sin IVA |
---|---|
1 - 4 | $ 99.845 |
5+ | $ 96.747 |
Documentos Técnicos
Especificaciones
Brand
EMERSON – ASCOVoltaje de suministro
24 V dc
Número de Puertos
3
Tamaño de Conexión
1/8in
Conexión
1/8 in G Female
Funcionamiento
Direct
Posición de la Válvula por Defecto
NC
Suitable Applications
Aire, gas inerte, aceite, agua
Tipo
3/2
Orifice Diameter
1.6mm
Serie
356
Material del Cuerpo
Brass
Presión máxima de trabajo
10 bares
Rango de Temperaturas de Funcionamiento
-10 → +100 °C
Mínima Temperatura de Funcionamiento
-10°C
Rosca Estándar o Tipo de Conexión
G
Temperatura máxima de funcionamiento
+100°C
Género de la Conexión
Female
Tiempo Máximo de Cierre
10ms
Factor de Flujo Kv
0.08m³/h
Tiempo Máximo de Apertura
10ms
Datos del producto
Válvulas solenoide 3//2 de control directo, serie 356
Válvulas solenoide 3 / 2 NC de control directo
Compactas y ligeras para facilitar la instalación.
Ninguna presión de control mínima.
Control manual estándar.
Cuerpo de latón.
Conectores enchufables.
Montados a través de 2 orificios perforados en la sección inferior.
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.