Válvula de solenoide EMERSON – ASCO 356 de 3 puertos, Hembra G de 1/8 pulg., Directo, NC de 24 V ac

Código de producto RS: 610-8942Marca: EMERSON – ASCONúmero de parte de fabricante: SCG356B002VMS.24/50-60
brand-logo
Ver todo de Válvulas de Solenoide

Documentos Técnicos

Especificaciones

Voltaje de suministro

24 V ac

Número de Puertos

3

Tamaño de la Conexión

1/8in

Conexión

1/8 in G Female

Funcionamiento

Direct

Posición de la Válvula por Defecto

NC

Suitable Applications

Aire, gas inerte, aceite, agua

Tipo

3/2

Orifice Diameter

1.6mm

Serie

356

Material del Cuerpo

Brass

Presión máxima de trabajo

10 bares

Rango de temperaturas de funcionamiento

-10 → +100 °C

Temperatura de Funcionamiento Máxima

+100°C

Género de Conexión

Female

Temperatura Mínima de Funcionamiento

-10°C

Rosca Estándar o Tipo de Conexión

G

Tiempo Máximo de Apertura

10ms

Tiempo Máximo de Cierre

10ms

Factor de Flujo Kv

0.08m³/h

País de Origen

France

Datos del producto

Válvulas solenoide 3//2 de control directo, serie 356

Válvulas solenoide 3 / 2 NC de control directo
Compactas y ligeras para facilitar la instalación.
Ninguna presión de control mínima.
Control manual estándar.
Cuerpo de latón.
Conectores enchufables.
Montados a través de 2 orificios perforados en la sección inferior.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Volver a intentar más tarde

Vuelva a verificar más tarde.

Volver a intentar más tarde

$ 99.845

Each (Sin IVA)

$ 118.816

Each (IVA Incluido)

Válvula de solenoide EMERSON – ASCO 356 de 3 puertos, Hembra G de 1/8 pulg., Directo, NC de 24 V ac

$ 99.845

Each (Sin IVA)

$ 118.816

Each (IVA Incluido)

Válvula de solenoide EMERSON – ASCO 356 de 3 puertos, Hembra G de 1/8 pulg., Directo, NC de 24 V ac
Volver a intentar más tarde

Comprar en grandes cantidades

CantidadPrecio Unitario sin IVA
1 - 4$ 99.845
5+$ 96.747

Documentos Técnicos

Especificaciones

Voltaje de suministro

24 V ac

Número de Puertos

3

Tamaño de la Conexión

1/8in

Conexión

1/8 in G Female

Funcionamiento

Direct

Posición de la Válvula por Defecto

NC

Suitable Applications

Aire, gas inerte, aceite, agua

Tipo

3/2

Orifice Diameter

1.6mm

Serie

356

Material del Cuerpo

Brass

Presión máxima de trabajo

10 bares

Rango de temperaturas de funcionamiento

-10 → +100 °C

Temperatura de Funcionamiento Máxima

+100°C

Género de Conexión

Female

Temperatura Mínima de Funcionamiento

-10°C

Rosca Estándar o Tipo de Conexión

G

Tiempo Máximo de Apertura

10ms

Tiempo Máximo de Cierre

10ms

Factor de Flujo Kv

0.08m³/h

País de Origen

France

Datos del producto

Válvulas solenoide 3//2 de control directo, serie 356

Válvulas solenoide 3 / 2 NC de control directo
Compactas y ligeras para facilitar la instalación.
Ninguna presión de control mínima.
Control manual estándar.
Cuerpo de latón.
Conectores enchufables.
Montados a través de 2 orificios perforados en la sección inferior.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.